Differentiating Depreciation Methods

In: Business and Management

Submitted By jamiwilson777
Words 296
Pages 2
The straight-line method of depreciation spreads the expense of depreciation evenly over the life of the asset. An advantage of this method is that it is a very straightforward approach and is uncomplicated and easy for users to understand and apply. However a disadvantage is because a company is paying the same depreciation amount every period it does not account for the loss of efficiency or repair expenses that an older piece of equipment may need. This method is commonly used for financial reporting because of it easy process and application.
The accelerated method of depreciation has the company paying higher depreciation expenses in the early life of the asset and lower expenses in the later years. With the accelerated method the company has larger depreciation in early years and will report less profit in early years and more profit in later years. An advantage to this method is the effects on the company’s income tax return. A higher depreciation in early years will mean an immediate income tax saving which is appealing. Another advantage would be offsetting the company’s income and lowering taxes. However this can also be a disadvantage by offsetting their income they have a lower reported income which can make it difficult to gain investors or get a loan from a bank. This method could also cause a company to rush replacement of efficient equipment when the tax benefit slows down. The company would then be replacing perfectly functioning equipment and creating a large purchasing expense before it is needed. Accelerated depreciation method is commonly used for tax reporting in order to benefit from tax savings. It is acceptable for a company to use the straight-line method for financial reporting and also use the accelerated method for tax…...

Similar Documents

Depreciation Methods

...will flow towards an entity. Depreciation is the lessening of value continuously on an asset that is being used (for example over a period of 5 years). As for example a vehicle is used, wear and tear occurs and depreciation is therefore written off on the vehicle (as less economic benefits will flow to an entity now that the vehicle has been used). Whereas impairment on the other hand, is when an asset's value suddenly drops. For example when a car gets damaged from an accident and is no longer worth what is was before the accident, the difference will be impairment. Impairment is also common in loans receivable from other companies, as the company who the money was lent to might become bankrupt and suddenly not be able to repay the loan. The loan balance will therefore be impaired Depreciation means the depreciable amount of an asset (cost/revalued amount less residual value) is allocated on a systematic basis over its useful life. Depreciation = Depreciable amount / Useful life Impairment means when an asset/s carrying amount is exceeds its recoverable amount, the amount over recoverable amount should be write off from carrying amount and present in Balance Sheet. This process is call as Impairment An impairment (loss) is the amount by which the carrying amount (i.e. balance sheet value) of an asset or cash-generating unit exceeds its recoverable amount. Impairment = Carrying value - Recoverable amount Calculation Choices depreciation is generally......

Words: 916 - Pages: 4

Depreciation

... Overview of Depreciation . . . . What Property Can Be Depreciated? . . . . What Property Cannot Be Depreciated? . . When Does Depreciation Begin and End? What Method Can You Use To Depreciate Your Property? . . . . . . . . . . . . . . . . . . What Is the Basis of Your Depreciable Property? . . . . . . . . . . . . . . . . . . . . . . How Do You Treat Repairs and Improvements? . . . . . . . . . . . . . . . . . Do You Have To File Form 4562? . . . . . . How Do You Correct Depreciation Deductions? . . . . . . . . . . . . . . . . . . . . Chapter 2. Electing the Section 179 Deduction . . . . . . . . . . . . . . . . . . . . . . . What Property Qualifies? . . . . . . . . . . . . . What Property Does Not Qualify? . . . . . . How Much Can You Deduct? . . . . . . . . . . How Do You Elect the Deduction? . . . . . . When Must You Recapture the Deduction? . . . . . . . . . . . . . . . . . . . . . . . . Publication 946 Cat. No. 13081F How To Depreciate Property • Section 179 Deduction • Special Depreciation Allowance • MACRS • Listed Property For use in preparing 3 4 6 7 ...... 7 . . . . . 11 . . . . . 12 . . . . . 12 . . . . . 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2012 Returns 15 15 17 18 22 23 Chapter 3. Claiming the Special Depreciation Allowance . . . . . . . . . . . . . . . . . . . . . . . . . . What Is Qualified Property? . . . . . . . . . . . . . . Election to Accelerate Certain Credits in Lieu of the Special Depreciation Allowance . ....

Words: 88487 - Pages: 354

Differentiating and Depreciation Methods

...Discuss and differentiate straight line method of depreciation and accelerated method. Depreciable assets lose value as time due to aging, obsolescence, wear and tear. The loss in value of tangible assets with time is called depreciation. The most commonly method used is straight line depreciation and in this method charges are spread evenly over the life of an asset. Every year in this method depreciation charged is constant which allows more income smoothing where income has a gradual change over the life of an asset without highs and dips. The accelerated method of depreciation assumes an asset is used heavily during the early years of its useful life then loses most of its value during first few years of use. In early years there will be heavy depreciation. It then decreases with time and by the end of life of an asset, the depreciation becomes zero meaning that this method lacks constant expense over time. Since depreciation is deducted from income for tax reporting, accelerated method allows larger tax deduction in early years that improves profit. Straight line method will also provide the same amount of tax deduction in later years but because of time value of money, tax saving in early years would be better for a company. Why do companies use different depreciation methods for tax reporting and financial reporting? Straight line method is used for financial reporting only since it resembles the benefit derived from an asset......

Words: 478 - Pages: 2

Depreciation

...not last indefinitely. Over time, these assets depreciate. Depreciation is defined as a non-cash expense that reduces the value of an asset as a result of physical or functional factors over time. Therefore, the costs of the fixed assets should be recorded as an expense over their useful lives, since they depreciate and must be replaced once the end of their useful life is reached. Physical depreciation factors include wear and tear during use or from being exposed to such things as weather. Functional depreciation factors include obsolescence or changes in customer needs that cause the asset to no longer provide services for which it was intended or needed. When it comes to computing depreciation, there are three factors that determine the depreciation expense for a fixed asset: the asset’s initial cost, expected useful life, and estimated residual value. And there are also three different ways to calculate depreciation: the straight –line method, the units-of-production method, and the double-declining-balance method. The straight-line method of depreciation provides the same amount of depreciation expense for each year of the asset’s useful life, and is known to be the most commonly used method of calculating depreciation. The unit’s-of-production method of depreciation provides the same amount of depreciation expense for each unit of production. Based on what the asset is, the unit’s-of-production method can be expressed in terms of quantity produced, miles,......

Words: 659 - Pages: 3

Differentiating Depreciation Methods

...CheckPoint: Differentiating Depreciation Methods Page 74 Study Question 2.4: Discuss the difference between the straight-line method of depreciation and the accelerated methods. Why do companies use different depreciation methods for tax reporting and financial reporting? Straight-Line depreciation is “Method that allocates the cost of an operational asset in equal periodic amounts over its useful life.” (Libby, A., & Short, 1998) Accelerated Depreciation is “Methods that result in higher depreciation expense in the early years of an operational asset’s life and lower expense in the later years”. (Libby, A., & Short, 1998) The differences are straight forward the Straight-Line keeps the same cost until the piece of equipment is no longer useful. The Accelerated Depreciation Method starts out with a larger amount of money and dwindles down as the piece of equipment deteriorates. “Depreciation expense reduces the amount of reported net income for a company, but it does not reduce the amount of cash generated by the company because it is a noncash expense. That is why, on the statement of cash flows, depreciation expense is added back to net income (accrual basis) to compute cash flows from operations.” (Libby, A., & Short, 1998) The reasons that companies use the different depreciation methods for tax reporting and financial reporting is due to income tax is based on income, depreciation is a deductible expense. “The higher the amount of depreciation......

Words: 281 - Pages: 2

Depreciation

...Suggested Solution Depreciation FA2 Part 1 Question 1 1-Jan-11 b/d Furniture and Fittings 100,000 31-Dec-11 c/d 100,000 31-Dec-11 c/d (FP) Accumulated of Depreciation on F&F 28,750 1-Jan-11 b/d 31-Dec-11 Depreciation 28,750 5% x (100,000-25,000) 3750 (CI) 25,000 3,750 28,750 working 1 Depreciation F&F Van 1-Jan-11 b/d 50,000 31-Dec-11 c/d 50,000 31-Dec-11 c/d (FP) Accumulated of Depreciation on van 17,000 1-Jan-11 b/d 31-Dec-11 Depreciation 17,000 10% x 50,000 5000 (CI) 12,000 5,000 17,000 working 2 Depreciation van Statement of Comprehensive Income (extract) for the year ended 31/12/2011 Less: Expenses Depreciation on F&F 3750 Depreciaiton on van 5000 Statement of Financial Position (extract) as at 31 July 2012 √ Non-current Asset Cost Acc. Dep Furniture & Fittings 100,000 28,750 Van 50,000 17,000 NBV 71,250 33,000 Prepared by Ms Nur Shahida Suggested Solution Depreciation FA2 Part 1 Question 2 1-Jan-10 b/d 1-Jan-11 b/d Lorry 60,000 31-Dec-10 c/d 60,000 31-Dec-11 c/d 60,000 60,000 1-Jan-10 Acc. Dep 1-Jan-11 Acc. Dep Depreciation on lorry 12,000 31-Dec-10 c/d (CI) 12,000 31-Dec-11 c/d (CI) 12,000 12,000 working 1 Depreciation 20% x 60000 12000 (CI) 31-Dec-10 c/d (FP) 31-Dec-11 c/d (FP) Accumulated of Depreciation on lorry 12,000 31-Dec-10 Depreciation 24,000 24,000 1-Jan-11 b/d 31-Dec-11 Depreciation 12,000 12,000 12,000 24,000 Statement of Comprehensive Income (extract) for......

Words: 760 - Pages: 4

Depreciation

...Depreciation Example | Cost | $ 110,000 | Salvage value | $ 20,000 | Useful life | 5 | Purchase date | January 1, 2011 | Straight line depreciation Year | Depreciation | | 2011 | $ 18,000 | =($110,000 - $20,000) x 1/5 | 2012 | $ 18,000 | =($110,000 - $20,000) x 1/5 | 2013 | $ 18,000 | =($110,000 - $20,000) x 1/5 | 2014 | $ 18,000 | =($110,000 - $20,000) x 1/5 | 2015 | $ 18,000 | =($110,000 - $20,000) x 1/5 | Total | $ 90,000 | | Double declining balance depreciation = 200% of SLD. Depreciation rate = 40% of WDV Year | Book value at the beginning of year | Depreciation rate | Depreciation expense | | Accumulated depreciation | Book value at year-end | 2011 | $ 110,000 | 40% | $ 44,000 | | $ 44,000 | $ 66,000 | 2012 | $ 66,000 | 40% | $ 26,400 | | $ 70,400 | $ 39,600 | 2013 | $ 39,600 | 40% | $ 15,840 | | $ 86,240 | $ 23,760 | 2014 | $ 23,760 | 40% | $ 3,760 | (*1) | $ 90,000 | $ 20,000 | 2015 | $ 20,000 | 40% | $ - | | $ 90,000 | $ 20,000 | Total | | | $ 90,000 | | | | (*1) Depreciation stops when accumulated depreciation reaches depreciation base. Depreciation base = cost - salvage value = $110,000 - $20,000 = $90,000 | Example Company X had purchased a Car on 1 April 2009 for ` 300,000. The car was sold for ` 100,000 on 30 June 2012. Depreciation rate on Car for various years were as under: 2009-10: WDV 20% 2010-11: WDV 20% 2011-12: WDV 30% (to be......

Words: 301 - Pages: 2

Depreciation

...Depreciation of Property, Plant and Equipment Group 8 1. Complete the textbook problem assigned to your group per the requirements of the specific problem or case. P-2 The cost of equipment purchased by Charleston, Inc., on June 1, 2014, is $89,000. It is estimated that the machine will have a $5,000 salvage value at the end of its service life. Its service life is estimated at 7 years, its total working hours are estimated at 42,000, and its total production is estimated at 525,000 units. During 2014, the machine was operated 6,000 hours and produced 55,000 units. During 2015, the machine was operated 5,500 hours and produced 48,000 units. Instructions: Compute depreciation expense on the machine for the year ending December 31, 2014, and the year ending December 31, 2015, using the following methods. (1) Straight-line. (2) Units-of-output. (3) Working hours. (4) Sum-of-the-years'-digits. (5) Declining-balance (twice the straight-line rate). Answer: (1) Straight-line. Year Cost Salvage value Estimated service life Partial depreciation expense 2014 $89,000 $5,000 7 0.58 $7,000 2015 $89,000 $5,000 7 1 $12,000 (2) Units-of-output. Year Cost Salvage value Total Production Units Produced Units depreciation expense 2014 $89,000 $5,000 525,000 55,000 $8,800 2015 $89,000 $5,000 525,000 48,000 $7,680 ...

Words: 1156 - Pages: 5

Depreciation

...Depreciation is the decline in the future economic benefits of a depreciable non-current asset through wear and tear and obsolescence. It is an allocation process. It can be calculated by two main methods, each reflecting in a distinct prospect in the way the asset is used. Depreciation is to be treated as an estimated expense that does not set aside cash for the replacement of a non-current asset. In determining the cost of acquisition of the lathes, any capital expenditure made must be added to the purchase price of the lathes. This amount will be considered as the historical cost and will be used in calculating the depreciation expense Depreciation is the allocation of the cost of a non-current asset less its estimated disposal value against revenue over the assets useful life. A depreciable asset is an asset that will be used over more than one accounting period and will gradually contribute to revenue over its useful life. However, it will give rise to future expenses as their future economic benefits are used up or expired. Examples of depreciable assets include machinery and motor vehicles. Generally, most non-current assets, with the exception of land, decline in their potential to provide future economic benefit. There are three factors that contribute to this decline. They are, the deterioration of a non-current asset due to the use of it, technical obsolescence, whereby certain assets become out of date due to technical innovations and improvements on a......

Words: 975 - Pages: 4

Economic Consequences of Firms’ Depreciation Method Choice: Evidence from Capital Investments

...Economic Consequences of Firms’ Depreciation Method Choice: Evidence from Capital Investments Scott B. Jackson* University of South Carolina Xiaotao (Kelvin) Liu Northeastern University Mark Cecchini University of South Carolina May 2009 * Corresponding author: Scott B. Jackson, School of Accounting, Moore School of Business, University of South Carolina, Columbia, SC 29208. E-mail: scott.jackson@moore.sc.edu. Phone: (803) 777-3100. Fax: (803) 777-0712. We gratefully acknowledge the comments of S.P. Kothari (the editor), an anonymous referee, Kin Blackburn, Tom Canace, Marc Caylor, Dutch Fayard, Victoria Glackin, Noah Jackson, Scott Whisenant, and Rich White. Electronic copy available at: http://ssrn.com/abstract=1415976 Economic Consequences of Firms’ Depreciation Method Choice: Evidence from Capital Investments Abstract: This study identifies several interrelated reasons why firms’ depreciation method choice is likely to influence managers’ capital investment decisions. We find that firms that use accelerated depreciation make significantly larger capital investments than firms that use straight-line depreciation. Further, we find that there has been a migration away from accelerated depreciation to straight-line depreciation over the past two decades. Firms that make such accounting changes make smaller capital investments in the post-change periods than in the pre-change periods. These results suggest that a choice made for external financial reporting......

Words: 13415 - Pages: 54

Differentiating Depreciation Methods

...tangible assets over time is considered depreciation. Most commonly used method is the straight line depreciation. With a method like this there are charges that are spread throughout the life of the asset evenly. In this method depreciation is charged constantly throughout every year. This occurrence allows more smoothing of income where there was gradual change over its useful life of assets without highs and lows. The accelerated method of depreciation concludes that assets used heavily during its early years of useful life and within the first few years loses most of value. During this method there will be very heavy depreciation in the early years. With time depreciation decreases and by the assets useful life, depreciation will be zero. Overtime this method does not have constant expense. For tax reporting depreciation is taken from income and the accelerated method allows bigger tax deductions in early years which improve profit. Straight line method also provides the same amount of tax deductions in later years. This is because of the moneys time value and tax saving during the early years is more for the do companies. They use different depreciation methods for the financial reporting purposes. The straight line method would be used because it’s very similar to the benefits derived from assets and the assets actual loss of value. Straight line method charges less depreciation than that of the accelerated method. This means that the company will have......

Words: 468 - Pages: 2

Depreciation

...Rupee Depreciation: Probable Causes and Outlook The Indian Rupee has depreciated significantly against the US Dollar marking a new risk for Indian economy. Till the beginning of the financial year (Apr 11-Mar 12) very few had expected Rupee to depreciate with most hinting towards either appreciation or status quo in the rupee levels. Those few who had even anticipated may not have imagined the scale of depreciation with rupee touching a new low of around Rs 54 to the US Dollar. What is even more interesting to note is that when other countries are trying to play currency wars and trying to keep their currencies devalued, India is trying to prevent depreciation of the currency. (Read our previous report for a review of the situation- Saying No To Currency Wars (20-Sep-11)) This paper reviews the probable reasons for this depreciation of the rupee and the outlook for the same. It also reflects on the policy options to help prevent the depreciation of the Rupee I. Economics of Currency Predicting currency movements is perhaps one of the hardest exercises in economics as it has many variables affecting the market movement. However, over a longer term currency movement is determined by following factors: Balance of Payments: It is the sum of current account and capital account of a country and is an external account of a country with other countries. Both current account and capital account play a role in determining the movement of the currency: o Current Account......

Words: 4067 - Pages: 17

E11-4 (Depreciation Computations—Five Methods)

...E11-4 (Depreciation Computations—Five Methods) Wenner Furnace Corp. purchased machinery for $279,000 on May 1, 2012. It is estimated that it will have a useful life of 10 years, salvage value of $15,000, production of 240,000 units, and working hours of 25,000. During 2013, Wenner Corp. uses the machinery for 2,650 hours, and the machinery produces 25,500 units. a. $279,000 – $15,000 = $264,000; $264,000 ÷ 10 yrs. = $26,400 b. $264,000 ÷ 240,000 units = $1.10; 25,500 units X $1.10 = $28,050 c. $264,000 ÷ 25,000 hours = $10.56 per hr.; 2,650 hrs. X $10.56 = $27,984 d. 10 + 9 + 8 + 7 + 6 + 5 + 4 + 3 + 2 + 1 = 55 OR n(n + 1) = 10(11) 55 "10 X $264,000 X 1/3 = $16,000 55 " 9 X $264,000 X 2/3 = 28,800 55 Total for 2013 $44,800 e. $279,000 X 20% X 1/3 = $18,600 [$279,000 – ($279,000 X 20%)] X 20% X 2/3 = 29,760 Total for 2013 $48,360 E11-8 Goldman Corporation bought a machine on June 1, 2010, for $31,800, f.o.b. the place of manufacture. Freight to the point where it was set up was $200, and $500 was expended to install it. The machine’s useful life was estimated at 10 years, with a salvage value of $2,500. On June 1, 2011, an essential part of the machine is replaced, at a cost of $2,700, with one designed to reduce the cost of operating the machine. The cost of the old part and related depreciation cannot be determined with any accuracy. On June 1, 2014, the company buys a new machine of greater......

Words: 495 - Pages: 2

Depreciation

...Depreciation Depreciation is a non-cash expense which reduces the value of a fixed asset except Land as a result of wear and tear, age, or obsolescence. Most assets lose their value over time (in other words, they depreciate), and must be replaced once the end of their useful or economic life is reached. There are several accounting methods that are used in order to write off an asset's depreciation cost over the period of its useful life because it is a non-cash expense, depreciation lowers the company's reported earnings while increasing free cash flow. In a simple word depreciation is all about the reduction in the value of fixed assets and the allocation of the cost of assets to periods in which the assets are used. While depreciation expense is recorded on the income statement of a business, its impact is generally recorded in a separate account and disclosed on the balance sheet as accumulated depreciation, under fixed assets, according to most accounting principles. Without an accumulated depreciation account on the balance sheet, depreciation expense is usually charged against the relevant asset directly. The values of the fixed assets stated on the balance sheet will decline, even if the business has not invested in or disposed of any assets. The amounts will roughly approximate fair value. Otherwise, depreciation expense is charged against accumulated depreciation. Showing accumulated depreciation separately on the balance sheet has the effect of......

Words: 605 - Pages: 3

Depreciation

...Depreciation Accounting 1 Types of Long-Lived Assets • Tangible asset • Asset with physical substance • Property, plant, and equipment = fixed asset. • Intangible asset • Intellectual property. • No physical substance • Examples are patent rights, copyrights 2 Amortization • View capital asset as bundle of services • Similar to prepaid expenses, cost is expensed as company benefits from the services • • • • Land - no depreciation Plant and equipment - depreciation Natural resources - depletion Intangible assets - amortization 3 Depreciation Methods • • Straight line method • (original cost - residual value) /service life Accelerated methods • Declining balance methods • Sum of the years’ or years’ digits methods 4 Declining Balance Method • Depreciation = book value * depreciation rate. • Double declining balance method = book value * 2 * straight line rate. • Straight line rate = 1/(life of asset in years). 5 Impaired Assets • • • An asset for which its remaining benefits, as measured by the sum of future cash flows the asset’s use will generate, is less than its book value If entity expects to hold asset • Write asset down to fair value If entity expects to sell asset • Write asset down to lower of cost or fair value less cost of disposal. 6 Group Depreciation n Group depreciation • Treats all similar assets as a “pool” or group rather than calculating for each item separately. • No gain or...

Words: 6999 - Pages: 28